| Hostnames |
ec2-44-232-229-175.us-west-2.compute.amazonaws.com sunrider.services |
| Domains | amazonaws.com sunrider.services |
| Cloud Provider | Amazon |
| Cloud Region | us-west-2 |
| Cloud Service | EC2 |
| Country | United States |
| City | Boardman |
| Organization | Amazon.com, Inc. |
| ISP | Amazon.com, Inc. |
| ASN | AS16509 |
Note: the device may not be impacted by all of these issues. The vulnerabilities are implied based on the software and version.
| CVE-2024-0727 | Issue summary: Processing a maliciously formatted PKCS12 file may lead OpenSSL to crash leading to a potential Denial of Service attack Impact summary: Applications loading files in the PKCS12 format from untrusted sources might terminate abruptly. A file in PKCS12 format can contain certificates and keys and may come from an untrusted source. The PKCS12 specification allows certain fields to be NULL, but OpenSSL does not correctly check for this case. This can lead to a NULL pointer dereference that results in OpenSSL crashing. If an application processes PKCS12 files from an untrusted source using the OpenSSL APIs then that application will be vulnerable to this issue. OpenSSL APIs that are vulnerable to this are: PKCS12_parse(), PKCS12_unpack_p7data(), PKCS12_unpack_p7encdata(), PKCS12_unpack_authsafes() and PKCS12_newpass(). We have also fixed a similar issue in SMIME_write_PKCS7(). However since this function is related to writing data we do not consider it security significant. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. |
| CVE-2023-5678 | Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn't make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn't check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the "-pubcheck" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. |
| CVE-2023-3817 | Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the "-check" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. |
| CVE-2023-2650 | Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow. Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service. An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods. When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(n^2) with 'n' being the size of the sub-identifiers in bytes (*). With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms. Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data. Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low. In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature. The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer's certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication. In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low. |
| CVE-2023-0466 | The function X509_VERIFY_PARAM_add0_policy() is documented to implicitly enable the certificate policy check when doing certificate verification. However the implementation of the function does not enable the check which allows certificates with invalid or incorrect policies to pass the certificate verification. As suddenly enabling the policy check could break existing deployments it was decided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy() function. Instead the applications that require OpenSSL to perform certificate policy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly enable the policy check by calling X509_VERIFY_PARAM_set_flags() with the X509_V_FLAG_POLICY_CHECK flag argument. Certificate policy checks are disabled by default in OpenSSL and are not commonly used by applications. |
| CVE-2023-0465 | Applications that use a non-default option when verifying certificates may be vulnerable to an attack from a malicious CA to circumvent certain checks. Invalid certificate policies in leaf certificates are silently ignored by OpenSSL and other certificate policy checks are skipped for that certificate. A malicious CA could use this to deliberately assert invalid certificate policies in order to circumvent policy checking on the certificate altogether. Policy processing is disabled by default but can be enabled by passing the `-policy' argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()' function. |
| CVE-2023-0464 | A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems. Policy processing is disabled by default but can be enabled by passing the `-policy' argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()' function. |
| CVE-2023-0286 | There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network. |
| CVE-2023-0215 | The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected. |
| CVE-2022-4304 | A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection. |
| CVE-2022-31629 | In PHP versions before 7.4.31, 8.0.24 and 8.1.11, the vulnerability enables network and same-site attackers to set a standard insecure cookie in the victim's browser which is treated as a `__Host-` or `__Secure-` cookie by PHP applications. |
| CVE-2022-31628 | In PHP versions before 7.4.31, 8.0.24 and 8.1.11, the phar uncompressor code would recursively uncompress "quines" gzip files, resulting in an infinite loop. |
| CVE-2022-2068 | 10.0In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.4 (Affected 3.0.0,3.0.1,3.0.2,3.0.3). Fixed in OpenSSL 1.1.1p (Affected 1.1.1-1.1.1o). Fixed in OpenSSL 1.0.2zf (Affected 1.0.2-1.0.2ze). |
| CVE-2022-1292 | 10.0The c_rehash script does not properly sanitise shell metacharacters to prevent command injection. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). Fixed in OpenSSL 1.1.1o (Affected 1.1.1-1.1.1n). Fixed in OpenSSL 1.0.2ze (Affected 1.0.2-1.0.2zd). |
| CVE-2022-0778 | 5.0The BN_mod_sqrt() function, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters. Thus vulnerable situations include: - TLS clients consuming server certificates - TLS servers consuming client certificates - Hosting providers taking certificates or private keys from customers - Certificate authorities parsing certification requests from subscribers - Anything else which parses ASN.1 elliptic curve parameters Also any other applications that use the BN_mod_sqrt() where the attacker can control the parameter values are vulnerable to this DoS issue. In the OpenSSL 1.0.2 version the public key is not parsed during initial parsing of the certificate which makes it slightly harder to trigger the infinite loop. However any operation which requires the public key from the certificate will trigger the infinite loop. In particular the attacker can use a self-signed certificate to trigger the loop during verification of the certificate signature. This issue affects OpenSSL versions 1.0.2, 1.1.1 and 3.0. It was addressed in the releases of 1.1.1n and 3.0.2 on the 15th March 2022. Fixed in OpenSSL 3.0.2 (Affected 3.0.0,3.0.1). Fixed in OpenSSL 1.1.1n (Affected 1.1.1-1.1.1m). Fixed in OpenSSL 1.0.2zd (Affected 1.0.2-1.0.2zc). |
| CVE-2021-4160 | 4.3There is a carry propagation bug in the MIPS32 and MIPS64 squaring procedure. Many EC algorithms are affected, including some of the TLS 1.3 default curves. Impact was not analyzed in detail, because the pre-requisites for attack are considered unlikely and include reusing private keys. Analysis suggests that attacks against RSA and DSA as a result of this defect would be very difficult to perform and are not believed likely. Attacks against DH are considered just feasible (although very difficult) because most of the work necessary to deduce information about a private key may be performed offline. The amount of resources required for such an attack would be significant. However, for an attack on TLS to be meaningful, the server would have to share the DH private key among multiple clients, which is no longer an option since CVE-2016-0701. This issue affects OpenSSL versions 1.0.2, 1.1.1 and 3.0.0. It was addressed in the releases of 1.1.1m and 3.0.1 on the 15th of December 2021. For the 1.0.2 release it is addressed in git commit 6fc1aaaf3 that is available to premium support customers only. It will be made available in 1.0.2zc when it is released. The issue only affects OpenSSL on MIPS platforms. Fixed in OpenSSL 3.0.1 (Affected 3.0.0). Fixed in OpenSSL 1.1.1m (Affected 1.1.1-1.1.1l). Fixed in OpenSSL 1.0.2zc-dev (Affected 1.0.2-1.0.2zb). |
| CVE-2021-3712 | 5.8ASN.1 strings are represented internally within OpenSSL as an ASN1_STRING structure which contains a buffer holding the string data and a field holding the buffer length. This contrasts with normal C strings which are repesented as a buffer for the string data which is terminated with a NUL (0) byte. Although not a strict requirement, ASN.1 strings that are parsed using OpenSSL's own "d2i" functions (and other similar parsing functions) as well as any string whose value has been set with the ASN1_STRING_set() function will additionally NUL terminate the byte array in the ASN1_STRING structure. However, it is possible for applications to directly construct valid ASN1_STRING structures which do not NUL terminate the byte array by directly setting the "data" and "length" fields in the ASN1_STRING array. This can also happen by using the ASN1_STRING_set0() function. Numerous OpenSSL functions that print ASN.1 data have been found to assume that the ASN1_STRING byte array will be NUL terminated, even though this is not guaranteed for strings that have been directly constructed. Where an application requests an ASN.1 structure to be printed, and where that ASN.1 structure contains ASN1_STRINGs that have been directly constructed by the application without NUL terminating the "data" field, then a read buffer overrun can occur. The same thing can also occur during name constraints processing of certificates (for example if a certificate has been directly constructed by the application instead of loading it via the OpenSSL parsing functions, and the certificate contains non NUL terminated ASN1_STRING structures). It can also occur in the X509_get1_email(), X509_REQ_get1_email() and X509_get1_ocsp() functions. If a malicious actor can cause an application to directly construct an ASN1_STRING and then process it through one of the affected OpenSSL functions then this issue could be hit. This might result in a crash (causing a Denial of Service attack). It could also result in the disclosure of private memory contents (such as private keys, or sensitive plaintext). Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k). Fixed in OpenSSL 1.0.2za (Affected 1.0.2-1.0.2y). |
| CVE-2021-23841 | 4.3The OpenSSL public API function X509_issuer_and_serial_hash() attempts to create a unique hash value based on the issuer and serial number data contained within an X509 certificate. However it fails to correctly handle any errors that may occur while parsing the issuer field (which might occur if the issuer field is maliciously constructed). This may subsequently result in a NULL pointer deref and a crash leading to a potential denial of service attack. The function X509_issuer_and_serial_hash() is never directly called by OpenSSL itself so applications are only vulnerable if they use this function directly and they use it on certificates that may have been obtained from untrusted sources. OpenSSL versions 1.1.1i and below are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1j. OpenSSL versions 1.0.2x and below are affected by this issue. However OpenSSL 1.0.2 is out of support and no longer receiving public updates. Premium support customers of OpenSSL 1.0.2 should upgrade to 1.0.2y. Other users should upgrade to 1.1.1j. Fixed in OpenSSL 1.1.1j (Affected 1.1.1-1.1.1i). Fixed in OpenSSL 1.0.2y (Affected 1.0.2-1.0.2x). |
| CVE-2021-23840 | 5.0Calls to EVP_CipherUpdate, EVP_EncryptUpdate and EVP_DecryptUpdate may overflow the output length argument in some cases where the input length is close to the maximum permissable length for an integer on the platform. In such cases the return value from the function call will be 1 (indicating success), but the output length value will be negative. This could cause applications to behave incorrectly or crash. OpenSSL versions 1.1.1i and below are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1j. OpenSSL versions 1.0.2x and below are affected by this issue. However OpenSSL 1.0.2 is out of support and no longer receiving public updates. Premium support customers of OpenSSL 1.0.2 should upgrade to 1.0.2y. Other users should upgrade to 1.1.1j. Fixed in OpenSSL 1.1.1j (Affected 1.1.1-1.1.1i). Fixed in OpenSSL 1.0.2y (Affected 1.0.2-1.0.2x). |
| CVE-2020-1971 | 4.3The X.509 GeneralName type is a generic type for representing different types of names. One of those name types is known as EDIPartyName. OpenSSL provides a function GENERAL_NAME_cmp which compares different instances of a GENERAL_NAME to see if they are equal or not. This function behaves incorrectly when both GENERAL_NAMEs contain an EDIPARTYNAME. A NULL pointer dereference and a crash may occur leading to a possible denial of service attack. OpenSSL itself uses the GENERAL_NAME_cmp function for two purposes: 1) Comparing CRL distribution point names between an available CRL and a CRL distribution point embedded in an X509 certificate 2) When verifying that a timestamp response token signer matches the timestamp authority name (exposed via the API functions TS_RESP_verify_response and TS_RESP_verify_token) If an attacker can control both items being compared then that attacker could trigger a crash. For example if the attacker can trick a client or server into checking a malicious certificate against a malicious CRL then this may occur. Note that some applications automatically download CRLs based on a URL embedded in a certificate. This checking happens prior to the signatures on the certificate and CRL being verified. OpenSSL's s_server, s_client and verify tools have support for the "-crl_download" option which implements automatic CRL downloading and this attack has been demonstrated to work against those tools. Note that an unrelated bug means that affected versions of OpenSSL cannot parse or construct correct encodings of EDIPARTYNAME. However it is possible to construct a malformed EDIPARTYNAME that OpenSSL's parser will accept and hence trigger this attack. All OpenSSL 1.1.1 and 1.0.2 versions are affected by this issue. Other OpenSSL releases are out of support and have not been checked. Fixed in OpenSSL 1.1.1i (Affected 1.1.1-1.1.1h). Fixed in OpenSSL 1.0.2x (Affected 1.0.2-1.0.2w). |
| CVE-2020-1968 | 4.3The Raccoon attack exploits a flaw in the TLS specification which can lead to an attacker being able to compute the pre-master secret in connections which have used a Diffie-Hellman (DH) based ciphersuite. In such a case this would result in the attacker being able to eavesdrop on all encrypted communications sent over that TLS connection. The attack can only be exploited if an implementation re-uses a DH secret across multiple TLS connections. Note that this issue only impacts DH ciphersuites and not ECDH ciphersuites. This issue affects OpenSSL 1.0.2 which is out of support and no longer receiving public updates. OpenSSL 1.1.1 is not vulnerable to this issue. Fixed in OpenSSL 1.0.2w (Affected 1.0.2-1.0.2v). |
| CVE-2020-11579 | 5.0An issue was discovered in Chadha PHPKB 9.0 Enterprise Edition. installer/test-connection.php (part of the installation process) allows a remote unauthenticated attacker to disclose local files on hosts running PHP before 7.2.16, or on hosts where the MySQL ALLOW LOCAL DATA INFILE option is enabled. |
| CVE-2019-9641 | 7.5An issue was discovered in the EXIF component in PHP before 7.1.27, 7.2.x before 7.2.16, and 7.3.x before 7.3.3. There is an uninitialized read in exif_process_IFD_in_TIFF. |
| CVE-2019-9639 | 5.0An issue was discovered in the EXIF component in PHP before 7.1.27, 7.2.x before 7.2.16, and 7.3.x before 7.3.3. There is an uninitialized read in exif_process_IFD_in_MAKERNOTE because of mishandling the data_len variable. |
| CVE-2019-9638 | 5.0An issue was discovered in the EXIF component in PHP before 7.1.27, 7.2.x before 7.2.16, and 7.3.x before 7.3.3. There is an uninitialized read in exif_process_IFD_in_MAKERNOTE because of mishandling the maker_note->offset relationship to value_len. |
| CVE-2019-9637 | 5.0An issue was discovered in PHP before 7.1.27, 7.2.x before 7.2.16, and 7.3.x before 7.3.3. Due to the way rename() across filesystems is implemented, it is possible that file being renamed is briefly available with wrong permissions while the rename is ongoing, thus enabling unauthorized users to access the data. |
| CVE-2019-9024 | 5.0An issue was discovered in PHP before 5.6.40, 7.x before 7.1.26, 7.2.x before 7.2.14, and 7.3.x before 7.3.1. xmlrpc_decode() can allow a hostile XMLRPC server to cause PHP to read memory outside of allocated areas in base64_decode_xmlrpc in ext/xmlrpc/libxmlrpc/base64.c. |
| CVE-2019-9023 | 7.5An issue was discovered in PHP before 5.6.40, 7.x before 7.1.26, 7.2.x before 7.2.14, and 7.3.x before 7.3.1. A number of heap-based buffer over-read instances are present in mbstring regular expression functions when supplied with invalid multibyte data. These occur in ext/mbstring/oniguruma/regcomp.c, ext/mbstring/oniguruma/regexec.c, ext/mbstring/oniguruma/regparse.c, ext/mbstring/oniguruma/enc/unicode.c, and ext/mbstring/oniguruma/src/utf32_be.c when a multibyte regular expression pattern contains invalid multibyte sequences. |
| CVE-2019-9021 | 7.5An issue was discovered in PHP before 5.6.40, 7.x before 7.1.26, 7.2.x before 7.2.14, and 7.3.x before 7.3.1. A heap-based buffer over-read in PHAR reading functions in the PHAR extension may allow an attacker to read allocated or unallocated memory past the actual data when trying to parse the file name, a different vulnerability than CVE-2018-20783. This is related to phar_detect_phar_fname_ext in ext/phar/phar.c. |
| CVE-2019-9020 | 7.5An issue was discovered in PHP before 5.6.40, 7.x before 7.1.26, 7.2.x before 7.2.14, and 7.3.x before 7.3.1. Invalid input to the function xmlrpc_decode() can lead to an invalid memory access (heap out of bounds read or read after free). This is related to xml_elem_parse_buf in ext/xmlrpc/libxmlrpc/xml_element.c. |
| CVE-2019-6977 | 6.8gdImageColorMatch in gd_color_match.c in the GD Graphics Library (aka LibGD) 2.2.5, as used in the imagecolormatch function in PHP before 5.6.40, 7.x before 7.1.26, 7.2.x before 7.2.14, and 7.3.x before 7.3.1, has a heap-based buffer overflow. This can be exploited by an attacker who is able to trigger imagecolormatch calls with crafted image data. |
| CVE-2019-1563 | 4.3In situations where an attacker receives automated notification of the success or failure of a decryption attempt an attacker, after sending a very large number of messages to be decrypted, can recover a CMS/PKCS7 transported encryption key or decrypt any RSA encrypted message that was encrypted with the public RSA key, using a Bleichenbacher padding oracle attack. Applications are not affected if they use a certificate together with the private RSA key to the CMS_decrypt or PKCS7_decrypt functions to select the correct recipient info to decrypt. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s). |
| CVE-2019-1559 | 4.3If an application encounters a fatal protocol error and then calls SSL_shutdown() twice (once to send a close_notify, and once to receive one) then OpenSSL can respond differently to the calling application if a 0 byte record is received with invalid padding compared to if a 0 byte record is received with an invalid MAC. If the application then behaves differently based on that in a way that is detectable to the remote peer, then this amounts to a padding oracle that could be used to decrypt data. In order for this to be exploitable "non-stitched" ciphersuites must be in use. Stitched ciphersuites are optimised implementations of certain commonly used ciphersuites. Also the application must call SSL_shutdown() twice even if a protocol error has occurred (applications should not do this but some do anyway). Fixed in OpenSSL 1.0.2r (Affected 1.0.2-1.0.2q). |
| CVE-2019-1552 | 1.9OpenSSL has internal defaults for a directory tree where it can find a configuration file as well as certificates used for verification in TLS. This directory is most commonly referred to as OPENSSLDIR, and is configurable with the --prefix / --openssldir configuration options. For OpenSSL versions 1.1.0 and 1.1.1, the mingw configuration targets assume that resulting programs and libraries are installed in a Unix-like environment and the default prefix for program installation as well as for OPENSSLDIR should be '/usr/local'. However, mingw programs are Windows programs, and as such, find themselves looking at sub-directories of 'C:/usr/local', which may be world writable, which enables untrusted users to modify OpenSSL's default configuration, insert CA certificates, modify (or even replace) existing engine modules, etc. For OpenSSL 1.0.2, '/usr/local/ssl' is used as default for OPENSSLDIR on all Unix and Windows targets, including Visual C builds. However, some build instructions for the diverse Windows targets on 1.0.2 encourage you to specify your own --prefix. OpenSSL versions 1.1.1, 1.1.0 and 1.0.2 are affected by this issue. Due to the limited scope of affected deployments this has been assessed as low severity and therefore we are not creating new releases at this time. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s). |
| CVE-2019-1551 | 5.0There is an overflow bug in the x64_64 Montgomery squaring procedure used in exponentiation with 512-bit moduli. No EC algorithms are affected. Analysis suggests that attacks against 2-prime RSA1024, 3-prime RSA1536, and DSA1024 as a result of this defect would be very difficult to perform and are not believed likely. Attacks against DH512 are considered just feasible. However, for an attack the target would have to re-use the DH512 private key, which is not recommended anyway. Also applications directly using the low level API BN_mod_exp may be affected if they use BN_FLG_CONSTTIME. Fixed in OpenSSL 1.1.1e (Affected 1.1.1-1.1.1d). Fixed in OpenSSL 1.0.2u (Affected 1.0.2-1.0.2t). |
| CVE-2019-1547 | 1.9Normally in OpenSSL EC groups always have a co-factor present and this is used in side channel resistant code paths. However, in some cases, it is possible to construct a group using explicit parameters (instead of using a named curve). In those cases it is possible that such a group does not have the cofactor present. This can occur even where all the parameters match a known named curve. If such a curve is used then OpenSSL falls back to non-side channel resistant code paths which may result in full key recovery during an ECDSA signature operation. In order to be vulnerable an attacker would have to have the ability to time the creation of a large number of signatures where explicit parameters with no co-factor present are in use by an application using libcrypto. For the avoidance of doubt libssl is not vulnerable because explicit parameters are never used. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s). |
| CVE-2018-7584 | 7.5In PHP through 5.6.33, 7.0.x before 7.0.28, 7.1.x through 7.1.14, and 7.2.x through 7.2.2, there is a stack-based buffer under-read while parsing an HTTP response in the php_stream_url_wrap_http_ex function in ext/standard/http_fopen_wrapper.c. This subsequently results in copying a large string. |
| CVE-2018-5712 | 4.3An issue was discovered in PHP before 5.6.33, 7.0.x before 7.0.27, 7.1.x before 7.1.13, and 7.2.x before 7.2.1. There is Reflected XSS on the PHAR 404 error page via the URI of a request for a .phar file. |
| CVE-2018-5711 | 4.3gd_gif_in.c in the GD Graphics Library (aka libgd), as used in PHP before 5.6.33, 7.0.x before 7.0.27, 7.1.x before 7.1.13, and 7.2.x before 7.2.1, has an integer signedness error that leads to an infinite loop via a crafted GIF file, as demonstrated by a call to the imagecreatefromgif or imagecreatefromstring PHP function. This is related to GetCode_ and gdImageCreateFromGifCtx. |
| CVE-2018-5407 | 1.9Simultaneous Multi-threading (SMT) in processors can enable local users to exploit software vulnerable to timing attacks via a side-channel timing attack on 'port contention'. |
| CVE-2018-20783 | 5.0In PHP before 5.6.39, 7.x before 7.0.33, 7.1.x before 7.1.25, and 7.2.x before 7.2.13, a buffer over-read in PHAR reading functions may allow an attacker to read allocated or unallocated memory past the actual data when trying to parse a .phar file. This is related to phar_parse_pharfile in ext/phar/phar.c. |
| CVE-2018-19520 | 6.5An issue was discovered in SDCMS 1.6 with PHP 5.x. app/admin/controller/themecontroller.php uses a check_bad function in an attempt to block certain PHP functions such as eval, but does not prevent use of preg_replace 'e' calls, allowing users to execute arbitrary code by leveraging access to admin template management. |
| CVE-2018-19396 | 5.0ext/standard/var_unserializer.c in PHP 5.x through 7.1.24 allows attackers to cause a denial of service (application crash) via an unserialize call for the com, dotnet, or variant class. |
| CVE-2018-19395 | 5.0ext/standard/var.c in PHP 5.x through 7.1.24 on Windows allows attackers to cause a denial of service (NULL pointer dereference and application crash) because com and com_safearray_proxy return NULL in com_properties_get in ext/com_dotnet/com_handlers.c, as demonstrated by a serialize call on COM("WScript.Shell"). |
| CVE-2018-17082 | 4.3The Apache2 component in PHP before 5.6.38, 7.0.x before 7.0.32, 7.1.x before 7.1.22, and 7.2.x before 7.2.10 allows XSS via the body of a "Transfer-Encoding: chunked" request, because the bucket brigade is mishandled in the php_handler function in sapi/apache2handler/sapi_apache2.c. |
| CVE-2018-15132 | 5.0An issue was discovered in ext/standard/link_win32.c in PHP before 5.6.37, 7.0.x before 7.0.31, 7.1.x before 7.1.20, and 7.2.x before 7.2.8. The linkinfo function on Windows doesn't implement the open_basedir check. This could be abused to find files on paths outside of the allowed directories. |
| CVE-2018-14883 | 5.0An issue was discovered in PHP before 5.6.37, 7.0.x before 7.0.31, 7.1.x before 7.1.20, and 7.2.x before 7.2.8. An Integer Overflow leads to a heap-based buffer over-read in exif_thumbnail_extract of exif.c. |
| CVE-2018-14851 | 4.3exif_process_IFD_in_MAKERNOTE in ext/exif/exif.c in PHP before 5.6.37, 7.0.x before 7.0.31, 7.1.x before 7.1.20, and 7.2.x before 7.2.8 allows remote attackers to cause a denial of service (out-of-bounds read and application crash) via a crafted JPEG file. |
| CVE-2018-10549 | 6.8An issue was discovered in PHP before 5.6.36, 7.0.x before 7.0.30, 7.1.x before 7.1.17, and 7.2.x before 7.2.5. exif_read_data in ext/exif/exif.c has an out-of-bounds read for crafted JPEG data because exif_iif_add_value mishandles the case of a MakerNote that lacks a final '\0' character. |
| CVE-2018-10548 | 5.0An issue was discovered in PHP before 5.6.36, 7.0.x before 7.0.30, 7.1.x before 7.1.17, and 7.2.x before 7.2.5. ext/ldap/ldap.c allows remote LDAP servers to cause a denial of service (NULL pointer dereference and application crash) because of mishandling of the ldap_get_dn return value. |
| CVE-2018-10547 | 4.3An issue was discovered in ext/phar/phar_object.c in PHP before 5.6.36, 7.0.x before 7.0.30, 7.1.x before 7.1.17, and 7.2.x before 7.2.5. There is Reflected XSS on the PHAR 403 and 404 error pages via request data of a request for a .phar file. NOTE: this vulnerability exists because of an incomplete fix for CVE-2018-5712. |
| CVE-2018-10546 | 5.0An issue was discovered in PHP before 5.6.36, 7.0.x before 7.0.30, 7.1.x before 7.1.17, and 7.2.x before 7.2.5. An infinite loop exists in ext/iconv/iconv.c because the iconv stream filter does not reject invalid multibyte sequences. |
| CVE-2018-10545 | 1.9An issue was discovered in PHP before 5.6.35, 7.0.x before 7.0.29, 7.1.x before 7.1.16, and 7.2.x before 7.2.4. Dumpable FPM child processes allow bypassing opcache access controls because fpm_unix.c makes a PR_SET_DUMPABLE prctl call, allowing one user (in a multiuser environment) to obtain sensitive information from the process memory of a second user's PHP applications by running gcore on the PID of the PHP-FPM worker process. |
| CVE-2018-0739 | 4.3Constructed ASN.1 types with a recursive definition (such as can be found in PKCS7) could eventually exceed the stack given malicious input with excessive recursion. This could result in a Denial Of Service attack. There are no such structures used within SSL/TLS that come from untrusted sources so this is considered safe. Fixed in OpenSSL 1.1.0h (Affected 1.1.0-1.1.0g). Fixed in OpenSSL 1.0.2o (Affected 1.0.2b-1.0.2n). |
| CVE-2018-0737 | 4.3The OpenSSL RSA Key generation algorithm has been shown to be vulnerable to a cache timing side channel attack. An attacker with sufficient access to mount cache timing attacks during the RSA key generation process could recover the private key. Fixed in OpenSSL 1.1.0i-dev (Affected 1.1.0-1.1.0h). Fixed in OpenSSL 1.0.2p-dev (Affected 1.0.2b-1.0.2o). |
| CVE-2018-0734 | 4.3The OpenSSL DSA signature algorithm has been shown to be vulnerable to a timing side channel attack. An attacker could use variations in the signing algorithm to recover the private key. Fixed in OpenSSL 1.1.1a (Affected 1.1.1). Fixed in OpenSSL 1.1.0j (Affected 1.1.0-1.1.0i). Fixed in OpenSSL 1.0.2q (Affected 1.0.2-1.0.2p). |
| CVE-2018-0732 | 5.0During key agreement in a TLS handshake using a DH(E) based ciphersuite a malicious server can send a very large prime value to the client. This will cause the client to spend an unreasonably long period of time generating a key for this prime resulting in a hang until the client has finished. This could be exploited in a Denial Of Service attack. Fixed in OpenSSL 1.1.0i-dev (Affected 1.1.0-1.1.0h). Fixed in OpenSSL 1.0.2p-dev (Affected 1.0.2-1.0.2o). |
| CVE-2017-9226 | 7.5An issue was discovered in Oniguruma 6.2.0, as used in Oniguruma-mod in Ruby through 2.4.1 and mbstring in PHP through 7.1.5. A heap out-of-bounds write or read occurs in next_state_val() during regular expression compilation. Octal numbers larger than 0xff are not handled correctly in fetch_token() and fetch_token_in_cc(). A malformed regular expression containing an octal number in the form of '\700' would produce an invalid code point value larger than 0xff in next_state_val(), resulting in an out-of-bounds write memory corruption. |
| CVE-2017-9224 | 7.5An issue was discovered in Oniguruma 6.2.0, as used in Oniguruma-mod in Ruby through 2.4.1 and mbstring in PHP through 7.1.5. A stack out-of-bounds read occurs in match_at() during regular expression searching. A logical error involving order of validation and access in match_at() could result in an out-of-bounds read from a stack buffer. |
| CVE-2017-8923 | 7.5The zend_string_extend function in Zend/zend_string.h in PHP through 7.1.5 does not prevent changes to string objects that result in a negative length, which allows remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact by leveraging a script's use of .= with a long string. |
| CVE-2017-7963 | 5.0The GNU Multiple Precision Arithmetic Library (GMP) interfaces for PHP through 7.1.4 allow attackers to cause a denial of service (memory consumption and application crash) via operations on long strings. NOTE: the vendor disputes this, stating "There is no security issue here, because GMP safely aborts in case of an OOM condition. The only attack vector here is denial of service. However, if you allow attacker-controlled, unbounded allocations you have a DoS vector regardless of GMP's OOM behavior. |
| CVE-2017-7890 | 4.3The GIF decoding function gdImageCreateFromGifCtx in gd_gif_in.c in the GD Graphics Library (aka libgd), as used in PHP before 5.6.31 and 7.x before 7.1.7, does not zero colorMap arrays before use. A specially crafted GIF image could use the uninitialized tables to read ~700 bytes from the top of the stack, potentially disclosing sensitive information. |
| CVE-2017-7272 | 5.8PHP through 7.1.11 enables potential SSRF in applications that accept an fsockopen or pfsockopen hostname argument with an expectation that the port number is constrained. Because a :port syntax is recognized, fsockopen will use the port number that is specified in the hostname argument, instead of the port number in the second argument of the function. |
| CVE-2017-3738 | 4.3There is an overflow bug in the AVX2 Montgomery multiplication procedure used in exponentiation with 1024-bit moduli. No EC algorithms are affected. Analysis suggests that attacks against RSA and DSA as a result of this defect would be very difficult to perform and are not believed likely. Attacks against DH1024 are considered just feasible, because most of the work necessary to deduce information about a private key may be performed offline. The amount of resources required for such an attack would be significant. However, for an attack on TLS to be meaningful, the server would have to share the DH1024 private key among multiple clients, which is no longer an option since CVE-2016-0701. This only affects processors that support the AVX2 but not ADX extensions like Intel Haswell (4th generation). Note: The impact from this issue is similar to CVE-2017-3736, CVE-2017-3732 and CVE-2015-3193. OpenSSL version 1.0.2-1.0.2m and 1.1.0-1.1.0g are affected. Fixed in OpenSSL 1.0.2n. Due to the low severity of this issue we are not issuing a new release of OpenSSL 1.1.0 at this time. The fix will be included in OpenSSL 1.1.0h when it becomes available. The fix is also available in commit e502cc86d in the OpenSSL git repository. |
| CVE-2017-3737 | 4.3OpenSSL 1.0.2 (starting from version 1.0.2b) introduced an "error state" mechanism. The intent was that if a fatal error occurred during a handshake then OpenSSL would move into the error state and would immediately fail if you attempted to continue the handshake. This works as designed for the explicit handshake functions (SSL_do_handshake(), SSL_accept() and SSL_connect()), however due to a bug it does not work correctly if SSL_read() or SSL_write() is called directly. In that scenario, if the handshake fails then a fatal error will be returned in the initial function call. If SSL_read()/SSL_write() is subsequently called by the application for the same SSL object then it will succeed and the data is passed without being decrypted/encrypted directly from the SSL/TLS record layer. In order to exploit this issue an application bug would have to be present that resulted in a call to SSL_read()/SSL_write() being issued after having already received a fatal error. OpenSSL version 1.0.2b-1.0.2m are affected. Fixed in OpenSSL 1.0.2n. OpenSSL 1.1.0 is not affected. |
| CVE-2017-3736 | 4.0There is a carry propagating bug in the x86_64 Montgomery squaring procedure in OpenSSL before 1.0.2m and 1.1.0 before 1.1.0g. No EC algorithms are affected. Analysis suggests that attacks against RSA and DSA as a result of this defect would be very difficult to perform and are not believed likely. Attacks against DH are considered just feasible (although very difficult) because most of the work necessary to deduce information about a private key may be performed offline. The amount of resources required for such an attack would be very significant and likely only accessible to a limited number of attackers. An attacker would additionally need online access to an unpatched system using the target private key in a scenario with persistent DH parameters and a private key that is shared between multiple clients. This only affects processors that support the BMI1, BMI2 and ADX extensions like Intel Broadwell (5th generation) and later or AMD Ryzen. |
| CVE-2017-3735 | 5.0While parsing an IPAddressFamily extension in an X.509 certificate, it is possible to do a one-byte overread. This would result in an incorrect text display of the certificate. This bug has been present since 2006 and is present in all versions of OpenSSL before 1.0.2m and 1.1.0g. |
| CVE-2017-16642 | 5.0In PHP before 5.6.32, 7.x before 7.0.25, and 7.1.x before 7.1.11, an error in the date extension's timelib_meridian handling of 'front of' and 'back of' directives could be used by attackers able to supply date strings to leak information from the interpreter, related to ext/date/lib/parse_date.c out-of-bounds reads affecting the php_parse_date function. NOTE: this is a different issue than CVE-2017-11145. |
| CVE-2017-12933 | 7.5The finish_nested_data function in ext/standard/var_unserializer.re in PHP before 5.6.31, 7.0.x before 7.0.21, and 7.1.x before 7.1.7 is prone to a buffer over-read while unserializing untrusted data. Exploitation of this issue can have an unspecified impact on the integrity of PHP. |
| CVE-2017-12868 | 7.5The secureCompare method in lib/SimpleSAML/Utils/Crypto.php in SimpleSAMLphp 1.14.13 and earlier, when used with PHP before 5.6, allows attackers to conduct session fixation attacks or possibly bypass authentication by leveraging missing character conversions before an XOR operation. |
| CVE-2017-11628 | 6.8In PHP before 5.6.31, 7.x before 7.0.21, and 7.1.x before 7.1.7, a stack-based buffer overflow in the zend_ini_do_op() function in Zend/zend_ini_parser.c could cause a denial of service or potentially allow executing code. NOTE: this is only relevant for PHP applications that accept untrusted input (instead of the system's php.ini file) for the parse_ini_string or parse_ini_file function, e.g., a web application for syntax validation of php.ini directives. |
| CVE-2017-11147 | 6.4In PHP before 5.6.30 and 7.x before 7.0.15, the PHAR archive handler could be used by attackers supplying malicious archive files to crash the PHP interpreter or potentially disclose information due to a buffer over-read in the phar_parse_pharfile function in ext/phar/phar.c. |
| CVE-2017-11145 | 5.0In PHP before 5.6.31, 7.x before 7.0.21, and 7.1.x before 7.1.7, an error in the date extension's timelib_meridian parsing code could be used by attackers able to supply date strings to leak information from the interpreter, related to ext/date/lib/parse_date.c out-of-bounds reads affecting the php_parse_date function. NOTE: the correct fix is in the e8b7698f5ee757ce2c8bd10a192a491a498f891c commit, not the bd77ac90d3bdf31ce2a5251ad92e9e75 gist. |
| CVE-2017-11144 | 5.0In PHP before 5.6.31, 7.x before 7.0.21, and 7.1.x before 7.1.7, the openssl extension PEM sealing code did not check the return value of the OpenSSL sealing function, which could lead to a crash of the PHP interpreter, related to an interpretation conflict for a negative number in ext/openssl/openssl.c, and an OpenSSL documentation omission. |
| CVE-2017-11143 | 5.0In PHP before 5.6.31, an invalid free in the WDDX deserialization of boolean parameters could be used by attackers able to inject XML for deserialization to crash the PHP interpreter, related to an invalid free for an empty boolean element in ext/wddx/wddx.c. |
| CVE-2017-11142 | 7.8In PHP before 5.6.31, 7.x before 7.0.17, and 7.1.x before 7.1.3, remote attackers could cause a CPU consumption denial of service attack by injecting long form variables, related to main/php_variables.c. |
| CVE-2016-9935 | 7.5The php_wddx_push_element function in ext/wddx/wddx.c in PHP before 5.6.29 and 7.x before 7.0.14 allows remote attackers to cause a denial of service (out-of-bounds read and memory corruption) or possibly have unspecified other impact via an empty boolean element in a wddxPacket XML document. |
| CVE-2016-9934 | 5.0ext/wddx/wddx.c in PHP before 5.6.28 and 7.x before 7.0.13 allows remote attackers to cause a denial of service (NULL pointer dereference) via crafted serialized data in a wddxPacket XML document, as demonstrated by a PDORow string. |
| CVE-2016-9933 | 5.0Stack consumption vulnerability in the gdImageFillToBorder function in gd.c in the GD Graphics Library (aka libgd) before 2.2.2, as used in PHP before 5.6.28 and 7.x before 7.0.13, allows remote attackers to cause a denial of service (segmentation violation) via a crafted imagefilltoborder call that triggers use of a negative color value. |
| CVE-2016-9138 | 7.5PHP through 5.6.27 and 7.x through 7.0.12 mishandles property modification during __wakeup processing, which allows remote attackers to cause a denial of service or possibly have unspecified other impact via crafted serialized data, as demonstrated by Exception::__toString with DateInterval::__wakeup. |
| CVE-2016-9137 | 7.5Use-after-free vulnerability in the CURLFile implementation in ext/curl/curl_file.c in PHP before 5.6.27 and 7.x before 7.0.12 allows remote attackers to cause a denial of service or possibly have unspecified other impact via crafted serialized data that is mishandled during __wakeup processing. |
| CVE-2016-8670 | 7.5Integer signedness error in the dynamicGetbuf function in gd_io_dp.c in the GD Graphics Library (aka libgd) through 2.2.3, as used in PHP before 5.6.28 and 7.x before 7.0.13, allows remote attackers to cause a denial of service (stack-based buffer overflow) or possibly have unspecified other impact via a crafted imagecreatefromstring call. |
| CVE-2016-7418 | 5.0The php_wddx_push_element function in ext/wddx/wddx.c in PHP before 5.6.26 and 7.x before 7.0.11 allows remote attackers to cause a denial of service (invalid pointer access and out-of-bounds read) or possibly have unspecified other impact via an incorrect boolean element in a wddxPacket XML document, leading to mishandling in a wddx_deserialize call. |
| CVE-2016-7417 | 7.5ext/spl/spl_array.c in PHP before 5.6.26 and 7.x before 7.0.11 proceeds with SplArray unserialization without validating a return value and data type, which allows remote attackers to cause a denial of service or possibly have unspecified other impact via crafted serialized data. |
| CVE-2016-7416 | 5.0ext/intl/msgformat/msgformat_format.c in PHP before 5.6.26 and 7.x before 7.0.11 does not properly restrict the locale length provided to the Locale class in the ICU library, which allows remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact via a MessageFormatter::formatMessage call with a long first argument. |
| CVE-2016-7414 | 7.5The ZIP signature-verification feature in PHP before 5.6.26 and 7.x before 7.0.11 does not ensure that the uncompressed_filesize field is large enough, which allows remote attackers to cause a denial of service (out-of-bounds memory access) or possibly have unspecified other impact via a crafted PHAR archive, related to ext/phar/util.c and ext/phar/zip.c. |
| CVE-2016-7413 | 7.5Use-after-free vulnerability in the wddx_stack_destroy function in ext/wddx/wddx.c in PHP before 5.6.26 and 7.x before 7.0.11 allows remote attackers to cause a denial of service or possibly have unspecified other impact via a wddxPacket XML document that lacks an end-tag for a recordset field element, leading to mishandling in a wddx_deserialize call. |
| CVE-2016-7412 | 6.8ext/mysqlnd/mysqlnd_wireprotocol.c in PHP before 5.6.26 and 7.x before 7.0.11 does not verify that a BIT field has the UNSIGNED_FLAG flag, which allows remote MySQL servers to cause a denial of service (heap-based buffer overflow) or possibly have unspecified other impact via crafted field metadata. |
| CVE-2016-7411 | 7.5ext/standard/var_unserializer.re in PHP before 5.6.26 mishandles object-deserialization failures, which allows remote attackers to cause a denial of service (memory corruption) or possibly have unspecified other impact via an unserialize call that references a partially constructed object. |
| CVE-2016-7132 | 5.0ext/wddx/wddx.c in PHP before 5.6.25 and 7.x before 7.0.10 allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) or possibly have unspecified other impact via an invalid wddxPacket XML document that is mishandled in a wddx_deserialize call, as demonstrated by a stray element inside a boolean element, leading to incorrect pop processing. |
| CVE-2016-7131 | 5.0ext/wddx/wddx.c in PHP before 5.6.25 and 7.x before 7.0.10 allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) or possibly have unspecified other impact via a malformed wddxPacket XML document that is mishandled in a wddx_deserialize call, as demonstrated by a tag that lacks a < (less than) character. |
| CVE-2016-7130 | 5.0The php_wddx_pop_element function in ext/wddx/wddx.c in PHP before 5.6.25 and 7.x before 7.0.10 allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) or possibly have unspecified other impact via an invalid base64 binary value, as demonstrated by a wddx_deserialize call that mishandles a binary element in a wddxPacket XML document. |
| CVE-2016-7129 | 7.5The php_wddx_process_data function in ext/wddx/wddx.c in PHP before 5.6.25 and 7.x before 7.0.10 allows remote attackers to cause a denial of service (segmentation fault) or possibly have unspecified other impact via an invalid ISO 8601 time value, as demonstrated by a wddx_deserialize call that mishandles a dateTime element in a wddxPacket XML document. |
| CVE-2016-7128 | 5.0The exif_process_IFD_in_TIFF function in ext/exif/exif.c in PHP before 5.6.25 and 7.x before 7.0.10 mishandles the case of a thumbnail offset that exceeds the file size, which allows remote attackers to obtain sensitive information from process memory via a crafted TIFF image. |
| CVE-2016-7127 | 7.5The imagegammacorrect function in ext/gd/gd.c in PHP before 5.6.25 and 7.x before 7.0.10 does not properly validate gamma values, which allows remote attackers to cause a denial of service (out-of-bounds write) or possibly have unspecified other impact by providing different signs for the second and third arguments. |
| CVE-2016-7126 | 7.5The imagetruecolortopalette function in ext/gd/gd.c in PHP before 5.6.25 and 7.x before 7.0.10 does not properly validate the number of colors, which allows remote attackers to cause a denial of service (select_colors allocation error and out-of-bounds write) or possibly have unspecified other impact via a large value in the third argument. |
| CVE-2016-7125 | 5.0ext/session/session.c in PHP before 5.6.25 and 7.x before 7.0.10 skips invalid session names in a way that triggers incorrect parsing, which allows remote attackers to inject arbitrary-type session data by leveraging control of a session name, as demonstrated by object injection. |
| CVE-2016-7124 | 7.5ext/standard/var_unserializer.c in PHP before 5.6.25 and 7.x before 7.0.10 mishandles certain invalid objects, which allows remote attackers to cause a denial of service or possibly have unspecified other impact via crafted serialized data that leads to a (1) __destruct call or (2) magic method call. |
| CVE-2016-10397 | 5.0In PHP before 5.6.28 and 7.x before 7.0.13, incorrect handling of various URI components in the URL parser could be used by attackers to bypass hostname-specific URL checks, as demonstrated by evil.example.com:80#@good.example.com/ and evil.example.com:80?@good.example.com/ inputs to the parse_url function (implemented in the php_url_parse_ex function in ext/standard/url.c). |
| CVE-2016-10161 | 5.0The object_common1 function in ext/standard/var_unserializer.c in PHP before 5.6.30, 7.0.x before 7.0.15, and 7.1.x before 7.1.1 allows remote attackers to cause a denial of service (buffer over-read and application crash) via crafted serialized data that is mishandled in a finish_nested_data call. |
| CVE-2016-10159 | 5.0Integer overflow in the phar_parse_pharfile function in ext/phar/phar.c in PHP before 5.6.30 and 7.0.x before 7.0.15 allows remote attackers to cause a denial of service (memory consumption or application crash) via a truncated manifest entry in a PHAR archive. |
| CVE-2016-10158 | 5.0The exif_convert_any_to_int function in ext/exif/exif.c in PHP before 5.6.30, 7.0.x before 7.0.15, and 7.1.x before 7.1.1 allows remote attackers to cause a denial of service (application crash) via crafted EXIF data that triggers an attempt to divide the minimum representable negative integer by -1. |
| CVE-2015-9253 | 6.8An issue was discovered in PHP 7.3.x before 7.3.0alpha3, 7.2.x before 7.2.8, and before 7.1.20. The php-fpm master process restarts a child process in an endless loop when using program execution functions (e.g., passthru, exec, shell_exec, or system) with a non-blocking STDIN stream, causing this master process to consume 100% of the CPU, and consume disk space with a large volume of error logs, as demonstrated by an attack by a customer of a shared-hosting facility. |
| CVE-2015-8994 | 6.8An issue was discovered in PHP 5.x and 7.x, when the configuration uses apache2handler/mod_php or php-fpm with OpCache enabled. With 5.x after 5.6.28 or 7.x after 7.0.13, the issue is resolved in a non-default configuration with the opcache.validate_permission=1 setting. The vulnerability details are as follows. In PHP SAPIs where PHP interpreters share a common parent process, Zend OpCache creates a shared memory object owned by the common parent during initialization. Child PHP processes inherit the SHM descriptor, using it to cache and retrieve compiled script bytecode ("opcode" in PHP jargon). Cache keys vary depending on configuration, but filename is a central key component, and compiled opcode can generally be run if a script's filename is known or can be guessed. Many common shared-hosting configurations change EUID in child processes to enforce privilege separation among hosted users (for example using mod_ruid2 for the Apache HTTP Server, or php-fpm user settings). In these scenarios, the default Zend OpCache behavior defeats script file permissions by sharing a single SHM cache among all child PHP processes. PHP scripts often contain sensitive information: Think of CMS configurations where reading or running another user's script usually means gaining privileges to the CMS database. |
| CVE-2015-8877 | 5.0The gdImageScaleTwoPass function in gd_interpolation.c in the GD Graphics Library (aka libgd) before 2.2.0, as used in PHP before 5.6.12, uses inconsistent allocate and free approaches, which allows remote attackers to cause a denial of service (memory consumption) via a crafted call, as demonstrated by a call to the PHP imagescale function. |
| CVE-2015-8874 | 5.0Stack consumption vulnerability in GD in PHP before 5.6.12 allows remote attackers to cause a denial of service via a crafted imagefilltoborder call. |
| CVE-2015-4601 | 10.0PHP before 5.6.7 might allow remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via an unexpected data type, related to "type confusion" issues in (1) ext/soap/php_encoding.c, (2) ext/soap/php_http.c, and (3) ext/soap/soap.c, a different issue than CVE-2015-4600. |
| CVE-2014-9426 | 7.5The apprentice_load function in libmagic/apprentice.c in the Fileinfo component in PHP through 5.6.4 attempts to perform a free operation on a stack-based character array, which allows remote attackers to cause a denial of service (memory corruption or application crash) or possibly have unspecified other impact via unknown vectors. NOTE: this is disputed by the vendor because the standard erealloc behavior makes the free operation unreachable |
| CVE-2014-5459 | 3.6The PEAR_REST class in REST.php in PEAR in PHP through 5.6.0 allows local users to write to arbitrary files via a symlink attack on a (1) rest.cachefile or (2) rest.cacheid file in /tmp/pear/cache/, related to the retrieveCacheFirst and useLocalCache functions. |
| CVE-2013-6501 | 4.6The default soap.wsdl_cache_dir setting in (1) php.ini-production and (2) php.ini-development in PHP through 5.6.7 specifies the /tmp directory, which makes it easier for local users to conduct WSDL injection attacks by creating a file under /tmp with a predictable filename that is used by the get_sdl function in ext/soap/php_sdl.c. |
| CVE-2013-2220 | 7.5Buffer overflow in the radius_get_vendor_attr function in the Radius extension before 1.2.7 for PHP allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a large Vendor Specific Attributes (VSA) length value. |
| CVE-2009-3767 | 4.3libraries/libldap/tls_o.c in OpenLDAP 2.2 and 2.4, and possibly other versions, when OpenSSL is used, does not properly handle a '\0' character in a domain name in the subject's Common Name (CN) field of an X.509 certificate, which allows man-in-the-middle attackers to spoof arbitrary SSL servers via a crafted certificate issued by a legitimate Certification Authority, a related issue to CVE-2009-2408. |
| CVE-2009-3766 | 6.8mutt_ssl.c in mutt 1.5.16 and other versions before 1.5.19, when OpenSSL is used, does not verify the domain name in the subject's Common Name (CN) field of an X.509 certificate, which allows man-in-the-middle attackers to spoof SSL servers via an arbitrary valid certificate. |
| CVE-2009-3765 | 6.8mutt_ssl.c in mutt 1.5.19 and 1.5.20, when OpenSSL is used, does not properly handle a '\0' character in a domain name in the subject's Common Name (CN) field of an X.509 certificate, which allows man-in-the-middle attackers to spoof arbitrary SSL servers via a crafted certificate issued by a legitimate Certification Authority, a related issue to CVE-2009-2408. |
| CVE-2009-1390 | 6.8Mutt 1.5.19, when linked against (1) OpenSSL (mutt_ssl.c) or (2) GnuTLS (mutt_ssl_gnutls.c), allows connections when only one TLS certificate in the chain is accepted instead of verifying the entire chain, which allows remote attackers to spoof trusted servers via a man-in-the-middle attack. |
| CVE-2007-3205 | 5.0The parse_str function in (1) PHP, (2) Hardened-PHP, and (3) Suhosin, when called without a second parameter, might allow remote attackers to overwrite arbitrary variables by specifying variable names and values in the string to be parsed. NOTE: it is not clear whether this is a design limitation of the function or a bug in PHP, although it is likely to be regarded as a bug in Hardened-PHP and Suhosin. |
-2095922108 | 2024-03-28T12:56:04.82634280 / tcp
-1030444411 | 2024-04-14T17:25:49.250256443 / tcp
